This motorcycle has a minigun
We would’ve loved to have been a fly on the wall when someone walked into a room and said, “You know what the world needs more of? Motorcycles with miniguns on them!”
Did the people blessed with this kind of wisdom previously work as Sonny Barger’s life coach? It certainly seems like every 1-percenter’s wet dream. Were they perhaps former department of corrections employees who were fired over suggesting that electric chairs be replaced with electric bleachers?
Perhaps they once pitched an ad-campaign slogan to Honda along the lines of, “You meet the nicest people on a motorcycle with a cannon.”
Wherever the idea came from, it apparently didn’t fall on deaf ears.
What was once only possible in movies has finally been brought to life, and RECOIL was privileged to see it in action. Lane splitting just took on a whole new meaning.
Brainstorming sessions between Dillon Aero and Tailgunner Exhaust led to something that looks like the bastard son of Blue Thunder. The Tailgunner Dillon Aero M134X Interceptor, as it’s called, found its way to our email inbox — so we sent our editor, Iain Knievel, out to investigate the situation further. We were all curious to see if this thing was intended for anything other than a potential reboot of Street Hawk (congrats if you even remember that show).
Our research revealed that the M134X was truly an engineering masterpiece. That’s because the brains behind it really know their craft.
You may have seen the work of brothers Cal and Charlie Giordano, proprietors of Tailgunner Exhaust, not only in their Gatling gun-inspired exhaust systems, but creations such as a handmade submarine that have appeared in episodes of Modern Marvels. They decided to approach the minigun gurus at Dillon Aero about creating a promotional conceptual bike.
Unlike many concept vehicles that are all show and no go, this one was engineered to be fully functional and designed for the average rider to operate.
To our knowledge, mounting a functioning minigun to a motorcycle chassis was never attempted until now.
The 300 pounds of recoil generated by the 7.62 NATO-caliber M134 was enough to make people believe that such a feat defied the laws of physics and begged too many unanswerable questions. Even if it could be fired while riding, how long would it take before the frame began to tear? Could it be aimed with any degree of accuracy? Was the driver guaranteed a Darwin Award?
The bike was built not only to defy the naysayers of minigun versatility, but also as a way to deploy the weapon system to the field quickly or to catch a fast-moving vehicle. In order to create a bike that drove and handled well enough to do all this, they chose the proven Yamaha R1 Superbike chassis as the platform. Its aluminum frame and high power-to-weight ratio enables the package to be light on its feet.
To disperse the load, Tailgunner created an aluminum cantilever mount for the gun that attaches where the custom extended swingarm connects. The linear actuator enables the gun to be moved up and down by a switch located where the turn signal formerly resided. The custom fuel tanks were moved to the rear of the bike for better balance. Heavy-duty billet aluminum steering yokes were also specially made for the project. Body panels are all fabricated from aircraft-grade aluminum and covered in MultiCam wrap by Crye Precision. Believe it or not, the whole bike only weighs about 500 pounds.
An air intake was built into the mount and two external air filters were mounted up high to allow for better filtration and easy maintenance. The bike is powered by a Yamaha 1,000cc inline-four with a twin nitrous oxide system. It’s all mated to the six-speed Yamaha transmission. The electronics are powered by a 12-volt battery that runs the motorcycle, with a separate 24-volt battery mounted inside the swingarm to operate the gun. A large Samsung smartphone in front of the driver serves as instrumentation to keep it simple.
The motorcycle doesn’t have to be running to fire. The gun can be armed with a switch on the console in front of the driver. The trigger is very appropriately located where the horn button was. Aiming is accomplished by moving the cantilever up or down and steering the bike right or left. Although that’s really dead reckoning in terms of accuracy, a laser sight and gun-mounted camera may be added in the future, with reticles appearing on the smartphone.
After two years of trial and error, a finished bike finally met the standards of all parties involved. The M134X will be put up for sale when its promotional duties are completed, and it is, in fact, street legal (without the gun, of course, unless you have the proper permits). Tailgunner could even create a replica if the money’s there. Civilian and law enforcement versions are already in the works.
Not only have the minds involved disproven the notion that mounting a minigun on a motorcycle was impossible, but they showed that it could be done in a practical way. Who knows, maybe we’ll see M134Xs roaming the battlefield one day with additions such as smoke screens, oil slicks, or caltrops. It seems the fellas at Tailgunner figured out a way to channel the spirits of Richard Gatling and Burt Munro. Nice to know guys who can come up with things like this are on our side. Check out the full videos on RECOILtv to see the M134X in action.
2016 Yamaha Tailgunner Dillon Aero M134X Interceptor
1,000cc Inline-Four With Twin Nitrous Oxide System
120/70-ZR17, front; 190/50-ZR17, back
M134D, 7.62x51mm NATO
Don’t think the fun stops there. Cal made this super shorty Timemachinist AR-M134X to complement the Tailgunner Dillon Aero M134X project. It’s an all-billet build based on a Sharps lower and a custom-made Timemachinist/Tailgunner Gatling-style upper.
Since the motorcycle itself and miniguns are nearly unobtainable to the public, you might be seeing AR Gatling Gun-inspired full-float tubes for sale in the future if the interest is there. The barrels don’t spin, but this pistol version has a Noveske 7.5 Diplomat barrel inside it.
While the AR-M134X was designed to look like a minigun barrel assembly, it was engineered to function as a high-performance handguard. Check out more of Cal’s work, such as his custom watches, at www.timemachinistwatches.com.
THE MIGHTY SURVEY GIVE-AWAY
We want to hear your thoughts. Complete our survey for a chance to win 1 of 5 gaming consoles
- RECOILtv Mail Call Video: Why You Need Red Dot Magnifiers
- Sig Sauer Begins P320 Voluntary Upgrade Program; Details Posted
- SIG SAUER P320 Safety Update
- Sig Sauer Issues Voluntary Upgrade for P320
- RECOILtv Full Auto Friday Video: MG42
- Too Much Red Dot? A Quick Reminder
Follow @RecoilMag on Twitter .