Check out Blackhawk's new T-series retention holsters
Blackhawk is in the midst of reinventing itself. Josh Waldron, who founded and ran SilencerCo, took the reins as president last year.
No more yelling
Note in particular that we're no longer yelling "Blackhawk!" — as the exclamation point has been excised from the over two-decades old brand. It's emblematic of the new leadership at Blackhawk and the revitalization they wish to propagate throughout the company. Waldron's been pushing hard to transform the company's culture and brand, build a passionate team, and release innovative products.
So it's fitting that the first full-scale product launch from the new team is the Blackhawk T-Series, a new line of retention holsters and successor to Blackhawk's ubiquitous and controversial Serpa holsters.
The type of retention provided by holsters is commonly referred to as ranging from level 1 to 3 (or 4). A level 1 holster only has passive retention, whereby friction keeps the pistol in place in the holster. Most concealed carry holsters are in this category. Level 2 holsters add active retention on top of friction, using some sort of mechanism that the user must actively disengage before they can draw their weapon. This could be a thumb break snap, as you might find on a leather holster, or some sort of button or lever. A typical application for this type of holster is law enforcement or open carry, as it provides additional security against someone accessing your sidearm. A level 3 holster adds yet another retention mechanism, such as a hood; these in particular are commonly used by uniformed law enforcement officers.
The highlight of the new T-Series system is its thumb-actuated retention release. By simply acquiring your master grip on the gun, your thumb naturally falls on the release lever. Pushing inward toward the gun with your thumb, as you would as you acquire your grip anyway, releases a spring-loaded trigger guard lock and allows you to draw the weapon. The release lever can only be accessed from directly above, making it more secure in a potential scuffle.
The level 3 duty holster version features a secondary retention mechanism, a spring-loaded rotating strap that loops behind the pistol's slide. Whereas some other holster systems require two separate motions to clear the first and second retention, the T-Series releases both the trigger guard lock and the strap in one fell swoop by pressing the thumb lever.
The polymer holster benefits from a two-stage manufacturing process that results in a strong Nylon exoskeleton with a soft-touch elastomeric inner liner that's waterproof, slippery, and noise-dampening.
As commonly found on concealment holsters, a screw adjusts the friction provided for passive retention. It tightens or loosens the holster to your preference. The backside of the holster features Blackhawk's three-hole pattern to attach belt loops, spacers, and quick detach attachments. The hole pattern allows you to configure the holster vertically or with a forward or backward rake. The offset belt loop on our sample was robust (much more so than Blackhawk's mass market belt loops and paddles) and can be screwed down to bite into a belt rig.
Removing the derp from the Serpa situation
In our range session with the T-Series holster, we found the thumb-actuated release to work well and to be very intuitive. The primary adjustment we had to make was to make sure to keep our thumb vertical when grabbing the gun rather than sweeping the thumb into place; the latter would result in hitting the shields around the lever and fumbling the draw. Additionally, we also had to adjust to the lack of a speed cut on the front of the sample holster, which fully shields the entire slide and rear sights.
The new system addresses key complaints about the Serpa system. First, the trigger finger isn't tasked with any other job than simply being a trigger finger. There's even a relief molded into the outside of the holster to guide your trigger finger safely. Instead, the thumb releases the retention, and it does so in a very intuitive motion for quick and efficient draws. Second, if you pull up on your gun before depressing the release on a Serpa, it stays locked. The T-Series will release the retention when the lever is pressed whether or not you're yanking on it like a teenage boy. Finally, the Serpa's retention latch is susceptible to locking up when clogged with debris. We've observed this ourselves during some training evolutions years ago. Blackhawk says the new T-Series has additional clearance specifically for debris and a different spring design to avoid this problem.
We also noticed that the new materials did mute the distinctive sounds of holstering and unholstering. It was by no means ninja-quiet, but certainly wasn't as loud as typical kydex or polymer holsters.
Blackhawk put a lot of thought and attention to detail into the design and manufacturing of the T-Series. This bodes well for the new Blackhawk, with or without an exclamation point.
The T-Series will initially be available for Glocks and in black, with support for additional pistols to come later in the year as well as variants with a speed cut that will be red dot compatible and options for weapon-mounted lights.
This article originally appeared on Recoilweb. Follow @RecoilMag on Twitter.
- Handgun holster selection II: how will you carry? | RECOIL ›
- .40 vs. 9mm: Weapon Manipulation Trumps Ballistics | RECOIL ›
- SIG SAUER Website Updates Reveal SHOT 2019 Releases | RECOIL ›
- Review: Marlin Custom Shop Model 1895 Modern Lever Hunter Rifle ›
- Alien Pistol From Laugo Arms in 9mm Teased | RECOIL ›