Why the US military switched from 7.62 to 5.56 rounds

Alex Hollings
Updated onDec 6, 2022 12:29 PM PST
3 minute read
Weapons photo

SUMMARY

In the modern era, the M-16 style rifle chambered in 5.56x45mm has become ubiquitous in imagery of the U.S. military, but that wasn’t always the case. America’s adoption of the 5.56mm round and the service rifle that fires it both came about as re…

In the modern era, the M-16 style rifle chambered in 5.56x45mm has become ubiquitous in imagery of the U.S. military, but that wasn't always the case. America's adoption of the 5.56mm round and the service rifle that fires it both came about as recently as the 1960s, as the U.S. and its allies set about looking for a more reliable, accurate, and lighter general issue weapon and cartridge.

Back in the early 1950s, the fledgling North Atlantic Treaty Organization (NATO) set about looking for a single rifle cartridge that could be adopted throughout the alliance, making it easier and cheaper to procure and distribute ammunition force-wide and adding a much needed bit of interoperability to the widely diverse military forces within the group. Despite some concerns about recoil, the 7.62x51mm NATO round was adopted in 1954, thanks largely to America's belief that it was the best choice available.

Sometimes it pays to have uniformity.
(U.S. Air Force photo by Justin Connaher)

The 7.62x51mm cartridge (which is more similar to the .308 than the 7.62x39mm rounds used in Soviet AKs) actually remains in use today thanks to its stopping power and effective range, but it wasn't long before even the 7.62's biggest champions in the U.S. began to recognize its shortcomings. These rounds were powerful and accurate, but they were also heavy, expensive, and created a great deal of recoil as compared to the service rifles and cartridges of the modern era.

As early as 1957, early development began on a new, small caliber, high velocity round and rifle platform. These new cartridges would be based on the much smaller and lighter .22 caliber round, but despite the smaller projectile, U.S. specifications also required that it maintained supersonic speed beyond 500 yards and could penetrate a standard-issue ballistic helmet at that same distance. What the U.S. military asked for wasn't possible with existing cartridges, so plans for new ammo and a new rifle were quickly drawn up.

In order to make a smaller round offer up the punch the U.S. military needed, Remington converted their .222 round into the .222 Special. This new round was designed specifically to withstand the amount of pressure required to make the new projectile meet the performance standards established by the Pentagon. The longer case of the .222 Special also made it better suited for magazine feeding for semi-automatic weapons. Eventually, the .222 Special was redubbed .223 Remington -- a name AR-15 owners may recognize as among the two calibers of rounds your rifle can fire.

The 7.62×51mm NATO and 5.56×45mm NATO cartridges compared to a AA battery.
WikiMedia Commons

That led to yet another new round, which FN based off of Remington's .223 caliber design, that was dubbed the 5.56x45mm NATO. This new round exceeded the Defense Department's requirements for muzzle velocity and range, and fired exceedingly well from Armalite designed rifles. Early tests showed increases in rifleman accuracy as well as decreases in weapon malfunctions when compared to the M1 Garand, with many experts contending at the time that the new rifle was superior to the M14, despite still having a few issues that needed to be worked out.

Armalite (which is where the "A" in AR-15 is derived) had scaled down their 7.62 chambered AR-10 to produce the new AR-15, which was capable of firing the new .223 rounds and later, the 5.56mm rounds. It also met all the other standard requirements for a new service rifle, like the ability to select between semi-automatic and fully-automatic modes of fire and 20 round magazine capacity. The combination of Armalite rifle and 5.56 ammunition was a match made in heaven, and branches started procuring the rifles in the 1960s. The 5.56 NATO round, however, wouldn't go on to be adopted as the standard for the alliance until 1980.

Polish Special Forces carrying the Israeli-made IWI Tavor chambered in 5.56 NATO
(WikiMedia Commons)

Ultimately, the decision to shift from 7.62x51mm ammunition to 5.56x45mm came down to simple arithmetic. The smaller rounds weighed less, allowing troops to carry more ammunition into the fight. They also created less recoil, making it easier to level the weapon back onto the target between rounds and making automatic fire easier to manage. Tests showed that troops equipped with smaller 5.56mm rounds could engage targets more efficiently and effectively than those firing larger, heavier bullets.

As they say in Marine Corps rifle teams, the goal is to locate, close with, and destroy the enemy -- and the 5.56mm NATO round made troops better at doing precisely that.

NEWSLETTER SIGNUP

Sign up for We Are The Mighty's newsletter and receive the mighty updates!

By signing up you agree to our We Are The Mighty's Terms of Use and We Are The Mighty's Privacy Policy.

SHARE